Marantz SA8004/K1SG Service Manual page 27

If the unit detects a fi le with corrupted fi le data or other unacceptable fi les, the display will show the following
message.
A- B 1 RPT
Display
Off
H
If the fi le includes big sized image data or information, the analysis may take time. If the analysis takes more than 15
seconds, the display will show the following message.
If this message appears, the operation of the fi le will not be covered by the warranty.
A- B 1 RPT
Display
Off
H S
If the USB module turns off the command for the settings of AMS, Repeat or Random, the display will show the
following message.
If the error persists after the mode is switched to Disc from USB and then reswitched to USB and the designated
remote control code is sent, U501 may be broken as it will not accept a specifi c command alone. If no other error
message appears, replace U501.
A- B 1 RPT
Display
Off
x h
If the USB module turns off the command for setting AMS, Repeat or Random and specifying the range, the display
will show the following message.
If the error persists after the mode is switched to Disc from USB and then reswitched to USB and the designated
remote control code is sent, U501 may be broken as it will not accept a specifi c command alone. If no other error
message appears, replace U501.
A- B 1 RPT
Display
Off
R a n g
When the unit has failed to search for a folder or a fi le, obtain folder information or set the default, the display will
show the following message.
If this error repeats, U501 may be broken. If that is the case, replace U501.
A- B 1 RPT
Display
Off
S e t u
RNDM PROG TRK SA-CD
S t r e
RNDM PROG TRK SA-CD
T i m
RNDM PROG TRK SA-CD
T M o
RNDM PROG TRK SA-CD
e
RNDM PROG TRK SA-CD
p
CD M FILE USB STRG D OFF
a m r E r r
CD M FILE STRG D OFF
USB
e m O u t
CD M FILE USB STRG D OFF
d e O E r r
CD M FILE STRG D OFF
USB
d E r r o r
CD M FILE USB STRG D OFF
d E r r o r
27
REMAIN TTL
r
REMAIN TTL
r r
REMAIN TTL
r
REMAIN TTL
r
REMAIN TTL
r