1.1 INTRODUCTION
This manual provides general information, hardware preparation, installation instructions, monitor
program description, operating instructions, hardware description, and support information for
the M68HC11 Evaluation Board (EVB).
Downloading S-record information is contained in Appendix A. While a listing of the EVB
monitor program is stored on the diskettes supplied with the EVB (see file buf25.asm). (This file
may be viewed using any text reader capable of handling a 123K file.)
Unless otherwise specified, all address references are in
hexadecimal throughout this manual.
An asterisk (*) following the signal name denotes that the signal is
true or valid when the signal is low.
1.2 FEATURES
EVB features include:
• An economical means of debugging user assembled code and evaluating target systems
incorporating MC68HC11 microcomputer unit (MCU) device
• One-line assembler/disassembler
• Host computer downloading capability
• MC68HC11 MCU based debugging/evaluating circuitry
• MC68HC24 Port Replacement Unit (PRU) based MCU I/O expansion circuitry
• MC6850 Asynchronous Communications Interface Adapter (ACIA) based terminal
I/O port circuitry
• RS-232C compatible terminal/host computer I/O ports
M68HC11EVB/D
CHAPTER 1
GENERAL INFORMATION
NOTE
GENERAL INFORMATION
1-1 1