Table of Contents
Advertisement
OPERATING INSTRUCTIONS
7. Enter EVB monitor download command as follows:
>LOAD T
8. Operate pull-down File menu, and select (choose): Send File ...
9. Use dialog box and select applicable S-record object file.
Click on:
Motorola S-record file is now transferred to the EVB.
S-record file will not be displayed during the file transfer to
the EVB.
Upon completion of the S-record transfer, the following message is displayed:
done
>
The EVB may have to be reset to regain monitor control
depending on the version of BUFFALO and how the file
transfer program terminates the download operation.
There is a problem which occurs when using the EVB with the MacTerminal program when
performing a downloading operation. The MacTerminal program sends a carriage return and line
feed characters at the end of the downloaded S-record file. The EVB monitor treats this as a
erroneous command; you must RESET the EVB to regain control of the monitor.
4-42
(Press RETURN after entering LOAD T.)
Send
NOTE
NOTE
M68HC11EVB/D
Advertisement
Table of Contents
