Siemens MICROMASTER 420 Operating Instructions Manual page 5

Issue 01/05
Definitions and Warning Information
Safety Guidelines
This documentation contains notes which you should observe to ensure your own
personal safety and also to prevent material damage. The information and
instructions for your personal safety are identified by a warning triangle. Information
and instructions on general material damage do not have a warning triangle.
depending on the degree of danger, they are indicated as follows:
DANGER
For the purpose of this documentation and on the warning label of the product
itself, "Danger" indicates that death, grievous injury or extensive damage to
property will occur if the appropriate precautions are not taken.
WARNING
For the purpose of this documentation and on the warning label of the product
itself, "Warning" indicates that death, grievous injury or extensive damage to
property may occur if the appropriate precautions are not taken.
CAUTION
"Caution" with a warning triangle, means that minor personal injury may occur if the
appropriate precautions are not taken.
CAUTION
"Caution" without a warning triangle, means that damage to property may occur if
the appropriate precautions are not taken.
NOTICE
means that an undesirable situation or condition can occur if the appropriate
information/instruction is not observed.
NOTE
For this purpose of this documentation, "Note" highlights an important item of
information about the product or a section of the instructions which requires careful
attention.
CANopen Option Module Operating Instructions
6SE6400-5BC00-0BP0
Definitions and Warning Information
5