Table of Contents
Advertisement
Press the tabs on the processor tool to release the processor, and then remove the processor tool.
5.
Close the processor socket retaining bracket and the processor locking lever.
6.
CAUTION:
Be sure to close the processor socket retaining bracket before closing the processor
locking lever. The lever should close without resistance. Forcing the lever closed can damage the
processor and socket, requiring system board replacement.
Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
7.
Allow the alcohol to evaporate before continuing.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
8.
CAUTION:
The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
Removal and replacement procedures 43
Advertisement
Table of Contents
