HP ProLiant BL685c G7 Maintenance And Service Manual page 36

If the processor has separated from the installation tool, carefully re-insert the processor in the tool.
1.
Handle the processor by the edges only, and do not touch the bottom of the processor, especially the
contact area.
The processor fits one way into the socket. Use the alignment guides on the processor and socket to
2.
properly align the processor with the socket. Install the spare processor. THE PINS ON THE SYSTEM
BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board:
Never install or remove a processor without using the processor installation tool.
•
• Do not touch the processor socket contacts.
Do not tilt or slide the processor when lowering the processor into the socket.
•
Removal and replacement procedures 36