Speed Select (Sog On/Off) - Raymarine ST60+ Tridata Owner's Handbook Manual

40

Speed select (SOG on/off)

Use this screen to select the data source for displayed speed information.Press
either the trip or reset button to toggle SOG ON or OFF as required. With
SOG OFF selected, speed information is obtained from the speed transducer.
This is the recommended setting if you have a speed transducer fitted.
With SOG ON selected, speed information is obtained from the SOG input.
Factory defaults
Dealer calibration
Hold down
Entry screen
Calibration
on/off
depth
depth
Boat Show
Mode
depth
ST60+ Tridata Instrument Owner's Handbook
+
depth speed
for approximately 12 seconds
+
trip reset
Use
or
trip reset
to set required values
Depth response
To leave calibration,
hold down
+
depth speed
for approximately 2 seconds
Speed
select
depth
depth
Speed
response
depth