Inatallation Of Flow Selector Unit - Toshiba MMU-AP0091H Owner's Manual Installation And Operation

4

INATALLATION OF FLOW SELECTOR UNIT

Install the unit securely in the place to sufficiently withstand the weight of the unit.
If the foundation is not sturdy enough, the unit may fall and cause personal injury.
Perform a specified installation work to guard against earth quake.
Improper installation may cause the unit to fall.
To prevent damage on the Flow Selector unit or personal injury, follow the instructions below.
• Do not step, or put any heavy object on the packed Flow Selector unit.
• When carrying the Flow Selector unit, hold the two hanging brackets and be careful not to apply excessive
force to the refrigerant pipes.
External view
RBM-Y1122FE, RBM-Y1802FE
Outdoor unit side
Refrigerant pipe connecting port
(Discharge gas)
Refrigerant pipe connecting port
(Liquid)
Refrigerant pipe connecting port
(Suction gas)
160
21
44
87
RBM-Y2802FE
Outdoor unit side
Refrigerant pipe connecting port
(Discharge gas)
Refrigerant pipe connecting port
(Liquid)
Refrigerant pipe connecting port
(Suction gas)
200
28
56
94
WARNING
REQUIREMENT
320 (Hanging bolt pitch)
250
(94)
(55)
These coils are
(99)
on Y1802FE only.
470 (Hanging bolt pitch)
400
(108)
(66)
These coils are
(109)
on Y1802FE only.
70
Indoor unit side
Hanging bracket
(99)
Earth screw (55)
Hanging bracket
(109)
Earth screw (65)
Refrigerant pipe connecting port
(Liquid)
Refrigerant pipe connecting port
(Gas)
54
75
Indoor unit side
Refrigerant pipe connecting port
(Gas)
Refrigerant pipe connecting port
(Liquid)
67
94