Toshiba MMU-AP0091H Owner's Manual Installation And Operation page 22

High Wall Type
(Model : 1H series)
• Push the projection at the center of air filter. Clip is out.
• Undo the clip of air filter, pull the air filter downward while pushing it
toward the main unit side.
(Model : 2H series)
• Open the air inlet grille.
Lift the air inlet grille up to the horizontal position.
• Take hold of the left and right handles of the air filter and lift it up
slightly, then pull downward to take it out from the filter holder.
Floor Standing Cabinet Type
• Push down the upper part of the suction port a little, and then pull
toward you to remove it.
• Take out the air filter inside of the suction port.
Floor Standing Concealed Type
• Push down hook of the air filter on the front panel (Lower side).
• Pull the air filter toward you to remove it.
Floor Standing Type
Removal / Attachment of air filter
• Pull the air filter toward you.
• To attach the air filter, insert it into the main body
and push in it.
• For cleaning of air filter, use a cleaner or brush clean. If stain is heavy,
it is effective to wash the air filter in tepid water mixed with neutral detergent.
• After washing, rinse it well, and dry it in the shade.
• Install again the air filter which has been cleaned.
Filter holder
NOTE
19
Push the air filter,
and pull it downward.
Front panel
(Lower)
Air filter knob