1040 LCD cable
Before you start, do the following:
1. Follow the instructions in "Before servicing the tablet" on page 46.
2. For access, remove the back cover assembly. See "1010 Back cover assembly" on page 48.
3. Remove the connector of the built-in battery from the system board. See step 1 in "1050 Built-in
battery" on page 54.
Removal steps of the LCD cable
Notes:
• Do not close the connector flips before inserting the cable.
• When installing the cable, ensure that the connectors are attached firmly.
1050 Built-in battery
Before you start, do the following:
1. Follow the instructions in "Before servicing the tablet" on page 46.
2. For access, remove the back cover assembly. See "1010 Back cover assembly" on page 48.
54
ThinkPad 10 Hardware Maintenance Manual
3
4
1
1
1
2