Removal steps of the docking support card
Step
Screw (quantity)
1
M1.6 × 4.0 mm, flat-head, nylon-coated (3)
Notes:
• Do not close the connector flip before inserting the cable.
• When installing the cable, ensure that the connector is attached firmly.
1130 Micro-HDMI-connector/USB-connector/dc-in-connector bracket
Before you start, do the following:
1. Follow the instructions in "Before servicing the tablet" on page 46.
2. For access, remove the back cover assembly. See "1010 Back cover assembly" on page 48.
3. Remove the connector of the built-in battery from the system board. See step 1 in "1050 Built-in
battery" on page 54.
Removal steps of the micro-HDMI-connector/USB-connector/dc-in-connector bracket
Step
Screw (quantity)
1
M1.6 × 4.0 mm, flat-head, nylon-coated (4)
3
2
1
1
5
1
4
1 1
1
1
Color
Torque
Silver
0.098 Nm
(1.00 kgf-cm)
Torque
Color
Silver
0.098 Nm
(1.00 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
61