Figure 5.2 Install Wavecom Module On Amo Base Board - Advantech ARK-1388V User Manual

I-PEX

Figure 5.2 Install Wavecom module on AMO base board

5.1.1.1 Mounting Wavecom module to the AMO base board
The antenna may be connected to the wavecom module via the UFL connector pre-
set as the below red mark place.
Figure 5.3 AMO-EDGE base board and wavecom module
This step is done prior to the wavecom module being mounted on AMO-EDGE base
board. Unscrew the top cover on ARK-1388V and you will see the internal SMA cable
as per Figure 5.4.
Figure 5.4 GPRS/EDGE SMA cable internally
53 ARK-1388V User Manual