Battery Installation - Lectrosonics PDR Quick Start Manual

Battery Installation

The audio recorder is powered by a single AAA lithium battery, offering over
six hours of operation. We recommend using lithium batteries for longest life.
NOTE: Although alkaline batteries will work in the PDR, we strongly
recommend that they be used only for short-term testing. For any
actual production use, we recommend the use of disposable lithium
AAA batteries.
The battery status indicator circuitry requires compensation for the difference
in voltage drop between alkaline and lithium batteries across their usable life,
so it's important to select the correct battery type in the menu.
Push inward on the release catches to open the door.
Insert the battery according to the markings inside the battery compartment
door. The (+) pos. end of the battery is oriented as shown here.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4
Battery
polarity
marking
Press tabs to
open door
LECTROSONICS, INC.