Available Recording Time - Lectrosonics PDR Quick Start Manual

Backlight
The recorder backlight can be set to turn off after either 5 minutes or 30 sec-
onds, or to stay on continuously.
Bat Type
Choose either Alkaline or Lithium battery type. The voltage of the installed
battery will be shown at the bottom of the display.
NOTE: Although alkaline batteries will work in the PDR, we strongly
recommend that they be used only for short-term testing. For any
actual production use, we recommend the use of disposable lithium
AAA batteries.
Remote
The recorder can be configured to respond to "dweedle tone" signals from the
PDRRemote app or to ignore them. Use the arrow buttons to toggle between
"yes" (remote control on) and "no" (remote control off). The default setting is
"no."
About PDR
The PDR's firmware version and serial number
are displayed.
Default
To return the recorder to its factory default settings, use the UP and DOWN
arrow buttons to choose Yes.

Available Recording Time

Using a microSDHC memory card, the available recording times are as fol-
lows. The actual time may vary slightly from the values listed in the tables.
HD mono mode
Size
8GB
16GB
32GB
Recommended SDHC Cards
We have tested a wide variety of cards and these performed the best with no issues or
errors.
•
Lexar 16GB High Performance
UHS-I (Lexar part number
LSDMI16GBBNL300).
•
SanDisk 16GB Extreme PLUS UHS-I
(SanDisk part number
SDSDQX-016G-GN6MA)
•
Sony 16GB UHS-I (Sony part number
SR16UXA/TQ)
www.lectrosonics.com
Split gain mode
Hrs:Min
11:12
23:00
46:07
Size Hrs:Min
8GB 5:36
16GB 11:30
32GB 23:03
•
PNY Technologies 16GB Elite UHS-1
(PNY part number
P-SDU16U185EL-GE)
•
Samsung 16GB PRO UHS-1
(Samsung part number
MB-MG16EA/AM)
13