Lectrosonics PDR Quick Start Manual page 14

PDRRemote
By New Endian LLC
Convenient remote control is provided by a phone app available on the Ap-
pStore and Google Play. The app uses audio tones ("dweedle tones") played
through the phone's speaker that are interpreted by the recorder to make
changes to the recorder settings:
• Record Start/Stop
• Audio playback level
• Lock/Unlock
The PDR tones are unique to the PDR and will not react to "dweedle tones"
meant for Lectrosonics transmitters.
The setup screens appear differently for iOS and Android phones, but provide
the same control settings.
Tone Playback
The following conditions are required:
• The microphone must be within range.
• The recorder must be configured to enable remote control activation. See
Remote on the menu.
Please be aware this app is not a Lectrosonics product. It
is privately owned and operated by New Endian LLC, www.
newendian.com.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
14 LECTROSONICS, INC.