Pairing The Ip501H With The Bc-218 Or; Pairing The Ip501H With The Bc-218 Or Vs-3 - Icom IP501H Instruction Manual

5
OPTIONAL PRODUCTS

■ Pairing the IP501H with the BC-218 or VS-3

Pairing is a process to be able to establish a connection between a headset and other Bluetooth devices. Once pairing is
established with the device, there is no need to pair again.
• You may not find a target Bluetooth device if there are many other Bluetooth
those devices, or move away from them.
• When the Bluetooth function is turned OFF, the audio is output from the IP501H. Be sure to not set the IP501H's
volume level too high.
LGuaranteed Bluetooth devices are the BC-218 and VS-3. (as of December 2017)
1. Turning ON the Bluetooth function
1. While holding down [FUNC], turn ON the transceiver power.
• Enters the Set mode.
2. Release [FUNC] when "SET" is displayed.
3. Push [FUNC] several times to select "Bluetooth."
4. Push [▲]/[▼] to select "Enable."
5. Push [CLR/LOCK].
• Exits the Set mode.
[電源/音量]ツマミ
[PWR/VOL]
[FUNC]キー
[FUNC]
[CLR/LOCK] [CLR/LOCK]キー
[▲]/[▼]
[▲]/[▼]キー
5-12
devices nearby. In that case, stop using
®
SET
LOG
– – –
SET
Bluetooth
Enable