Operation In The Set Mode - Icom IP501H Instruction Manual

4
SET MODE

■ Operation in the Set mode

1. Push [FUNC] or [Address] to select an item.
2. Push [▲]/[▼] to set the value.
3. Push [PTT] or [CLR/LOCK] to save the value and exit the Set mode.
• Push [Call history] to execute the following functions.
• LOG
• RESET*
• FIRM UP*
• Delete Recorded Audio
• Delete Bluetooth Device
• Search Bluetooth Device
• Initialize Bluetooth Unit
* After performing these functions, IP501H automatically restarts.
L Updating the fi rmware takes approximately 10 minutes.
[ア ドレス帳]キー [Address]
[Call history]
[履歴]キー
[FUNC]
[FUNC]キー
[CLR/LOCK]キー [CLR/LOCK]
[▲]/[▼]キー [▲]/[▼]
4-3
Example: Setting the Key-Touch Beep Volume
SET
LOG
– – –
SET
Key-Touch Beep Vo
10
SET
Key-Touch Beep Vo
0
Setting the Key Touch Beep Volume to "0"
Example: Updating the fi rmware
SET
FIRM UP
YES
SET
FIRM UP···
Connecting···
SET
FIRM UP FIRM UP
Rcvd Rcvd
SET
FIRM UP···
Updating···
Updating
Updating the firmware