Back Panel; Returning The Cisco 350Xg Switches To The Factory Default Settings - Cisco SG350XG-2F10 Quick Start Manual

SFP+ (if present) —(Green) Located on the right of a 10G port. Lights
steady when a connection is made through the shared port. Flashes when
the port is passing traffic.
Reset Button
The switch can be reset by inserting a pin or paper clip into the Reset
button opening on the front panel of the switch. See
350XG Switches to the Factory Default Settings

Back Panel

The power port and console port are located on the back panel of the
switch.
Power—Connects the switch to AC power.
Console—Connects a serial cable to a computer serial port so that it can
be configured by using a terminal emulation program.
Returning the Cisco 350XG Switches to
6
the Factory Default Settings
To use the Reset button to reboot or reset the switch, do the following:
• To reboot the switch, press and hold the Reset button for less than ten
seconds.
• To restore the switch to its factory default settings:
– Disconnect the switch from the network or disable all DHCP
servers on your network.
– With the power on, press and hold the Reset button for more than
ten seconds.
Cisco 350XG Series 1OG Stackable Switches Quick Start Guide
Returning the Cisco
for details.
11