Connecting To Other Video Equipment; Connecting Other Audio Equipment; Analog Connection; Digital Connection - RCA Home Theater Audio System Owner's Manual

31-5025.fm Page 8 Wednesday, January 15, 2003 5:05 PM
BEFORE YOU START

CONNECTING TO OTHER VIDEO EQUIPMENT

Rear of Unit
1. Use a video cable (not supplied, available at your local
RadioShack store or online at www.radioshack.com) to connect
the TV VIDEO OUT jack on the rear of your player to VIDEO IN
jack on your TV.
2. Using the supplied audio/video cable, connect the yellow plug
from the AV1 VIDEO IN jack on the rear of your player, or AV2
VIDEO IN jack on the front panel of your player, to the VIDEO
OUT jack on the other equipment.
3. Using the supplied audio/video cable, connect the white and red
audio plugs from the AV1 AUDIO IN R/L jacks on the rear of
your player, or the AV2 AUDIO IN R/L jacks on the front panel
of your player, to the AUDIO OUT jacks on the other
equipment.

CONNECTING OTHER AUDIO EQUIPMENT

A C
NALOG ONNECTION
Use the supplied audio/video cable to connect the AUDIO OUT L/R
jacks on the rear of your player to the AUDIO IN jacks.
D C
IGITAL ONNECTION
Use a coaxial digital audio cable (not supplied, available from
A
RadioShack) to connect the coaxial cable to your other
equipment.
Or, use an optical digital cable (not supplied, available from
B
RadioShack) to connect the OPTICAL OUT jack on the rear of
your player to the OPTICAL IN jack on your other equipment.
8
Other Video
Equipment
A
or
B
Notes:
• If the external equipment is a television and this audio system is
close to it, you may experience interference if the TUNER
function is selected while the television is working.
• While the VCR is connected to the DVD player, make sure to set
your VCR to stereo mode, otherwise the activated speakers may
be different than expected. See "Selecting the Listening Channel"
on page 30.
• The digital connection is for DVD and VCR only.

LISTENING TO OTHER AUDIO EQUIPMENT

1. Turn on the player.
2. Turn on your audio equipment and follow the instructions
included with it to select the AUDIO IN or DIGITAL IN
function.

CONNECTING ANTENNAS

FM A
NTENNA
Press the FM ANT. 300 terminal levers and insert the supplied FM
antenna wire ends in the terminal jacks.

FM Antenna

AM Loop Antenna

AM L A
OOP NTENNA
1. Insert the supplied loop antenna's plug into AM LOOP ANT.
The plug fits only one way. Do not force it.
2. Snap the supplied stand onto the bottom of the AM loop
antenna and place it on a flat surface.
3. Keep the antenna as far away as possible from the player,
speaker cords, and power cord to prevent unwanted noise.