Connecting The Speakers; Positioning The Speakers; Mounting Speakers; Connecting Power - RCA Home Theater Audio System Owner's Manual

31-5025.fm Page 9 Wednesday, January 15, 2003 5:05 PM

CONNECTING THE SPEAKERS

The speaker cords have been color-coded to simplify connection.
Plug the POSITIVE (+, red) and NEGATIVE (-, black) ends of each
speaker wire into the corresponding jacks on the rear of the player,
matching the color on the end of the speaker wire to the color-coded
connector.
Connect each of the speaker wires to the front, rear, and center
speakers respectively.
Notes:
• The positive (red) terminals are on the right.
• The negative wires are marked with black dashes.
• The longer cords are for the rear speakers and the shorter cords
are for the front speakers.
P S
OSITIONING THE PEAKERS
M S
OUNTING PEAKERS
1. Mark the desired mounting positions on the wall.
2. Insert screws in the marked positions on the wall.
3. Align the speaker' s slot holes over the screws and pull the
speaker downward until it is firmly hooked.
4. Repeat Steps 1 – 3 to mount each speaker on the wall.

CONNECTING POWER

Make sure all the components and speakers are connected correctly.
Match the plug' s wide blade to the outlet' s wide slot, and insert the
plug fully.
BEFORE YOU START
9