Download Print this page

EarthQuaker Devices Pyramids Operation Manual

Hide thumbs Also See for Pyramids:

Download this manual

O P E R A T I O N M A N U A L

Page 1 O P E R A T I O N M A N U A L...
Page 2 Turn it clockwise for a unmodulated dry signal. This controls glass in the Ark of the Covenant Jamie Stillman keeps in his basement. Pyramids is built upon shorter delay time and a higher-pitched flange where in the LFO cycle the through-zero the same proprietary DSP architecture as the Avalanche Run, only this time it’s way flangier.
Page 3 To trigger Pyramids using an external source, plug your primary instrument (the signal on which tops from England (you know which ones) and on the most ripping riffs to come from the NWOBHM. you want to hear the flanger) into the Right Input and connect Pyramids’ Right Output to your amplifier Through-Zero or DAW.
Page 4 Right Output to the next pedal in a separate effects chain, to a separate DAW input, or to a separate • Voila! Your Pyramids sounds as fresh as the day it left the factory. amplifier. I have no idea why anyone would want to do this, but it’ll work.
Page 5 • For best results, please use the included 9v center-negative 1-amp DC power supply. • To use with multiple output transformer-balanced isolated pedal-specific power supplies, Pyramids’ may be powered from two outlets combined using a current-doubling cable. DO NOT USE A VOLTAGE-DOUBLING CABLE BECAUSE THAT WILL SEND 18V TO PYRAMIDS AND FRY IT LIKE AN OVEREASY EGG AT A GREAZY SPOON DINER.