Advertisement
<<< Presets >>>
Pyramids ships with five example factory presets:
1- Classic
2- Barber Pole Up
3- Trigger Up
4- Step
5- Random
These are intended to get you started and are by no means the be-all-end-all examples of these
modes. Please feel free to modify or overwrite these as you'd like!
To Modify an Existing Preset
• Turn the Preset Rotary Switch to the preset you wish to change.
• Adjust the controls to your desired settings. When a control has been changed, the Activate
LED will turn from yellow to red to indicate a change is being made. The red LED is a warning
that a preset is being edited. Any changes made at this point will be lost unless the preset
is saved.
• To save your changes, press and release both the Activate Footswitch and the Tap/Trigger
Footswitch at the same time. The Activate LED will then flash yellow. Once the LED is yellow,
your modified preset is saved!
To Write Your Own Preset
• Adjust the controls to your desired settings.
• Press and hold the Activate Footswitch.
• While holding the Activate Footswitch, press and hold the Tap/Trigger Footswitch.
• While holding down both footswitches, turn the Preset Rotary Switch to the desired preset
location (1-5) and release both footswitches.
• The Activate LED will flash and then turn yellow.
• Once the Activate LED turns yellow, your preset is saved!
To Restore Factory Presets
• Turn the Preset Rotary Switch to the Live position.
• Unplug Pyramids' power supply from the power jack.
• Press and hold both the Activate Footswitch and the Tap/Trigger Footswitch.
• Insert the power plug into Pyramids' power jack.
• Release both footswitches.
• Voila! Your Pyramids sounds as fresh as the day it left the factory.
<<< Inputs & Outputs >>>
To Use Pyramids in Mono
Plug your instrument into the Left Input and use either the Left Output or the Right Output.
To Use Pyramids with a Mono Input and Stereo Output
Plug your instrument into the Left Input and connect both the Left Output and Right Output to the next
stereo pedal in your chain, to two inputs of your DAW, or to two amplifiers.
To Use Pyramids with a Stereo Input and Stereo Output
Plug your stereo instrument into the Left Input and Right Input and connect both the Left Output and
Right Output to the next stereo pedal in your chain, to two inputs of your DAW, or to two amplifiers.
Pyramids is true stereo and will pan across the stereo field.
To Use Pyramids with Two Mono Sources
Plug one instrument into the Left Input and connect the Left Output to the next pedal in your chain, to
a DAW input, or to an amplifier. Then, plug another instrument into the Right Input and connect the
Right Output to the next pedal in a separate effects chain, to a separate DAW input, or to a separate
amplifier. I have no idea why anyone would want to do this, but it'll work.
Advertisement
