Recommendations For Use - jbc AL-9A Reference Manual

ENGLISH
AL Solder feed station
- AL 230V
- AL 120V
- AL 100V
This station allows you to keep the hand that would
normally hold the solder wire free. If you plan to
use accessories such as pedal switch and stand
arm, then both hands will remain free. This system
is also designed to work as an automatic solder
feed station.
The system includes:
- Control unit.
- Solder feed handpiece
with the 250-403 cartridge
- AL solder feed stand
Solder thread guide tube
Ref. AL-2A
Ref. AL-1A
Ref. AL-9A
Ref. AL-A
Ref. C250403
Ref. AL-SA
Pressure regulation of
the spring tightening
control
2
- Guide set for solder thread 0,9 - 1
- Connection cable to mains.
- Transport packaging.

RECOMMENDATIONS FOR USE

For soldering
- Preferably select a temperature below 350°C
(662ºF). Excess temperature reduce tip life.
- The tip must be well tinned for good heat
conduction.
Safety measures
- Place the tool back on its stand in order to let it
cool down before you store it.
Dragging to adjust the solder
thread strength
Command to release the pres-
sure of the wheels of the solder
dragging mechanism
Pedal connector or
external command
Stand connector
ø
Ref. 0002401
Equipotential
connector