Configuring Gateways For Dhcp Clients - H3C S9500 Series Operation Manual

Operation Manual – DHCP
H3C S9500 Series Routing Switches
II. Configuring a custom DHCP option in a VLAN interface address pool
Perform the following configuration in VLAN interface view to configure a custom DHCP
option in the VLAN interface address pool:
Configure a custom DHCP option in the
DHCP address pool of the current VLAN
interface
Remove a custom DHCP option from the
DHCP address pool of the current VLAN
interface
III. Configuring a custom DHCP option in multiple VLAN interface address
pools
Perform the following configuration in system view to configure a custom DHCP option
in multiple VLAN interface address pools:
Configure a custom DHCP option for
DHCP address pools of multiple VLAN
interfaces
Remove a custom DHCP option from
DHCP address pools of multiple VLAN
interfaces
If you execute the dhcp server option command multiple times, the newly configured
option overwrites the existing one.

2.1.10 Configuring Gateways for DHCP Clients

An outbound gateway enables DHCP clients to access external network devices. At
present, you can configure up to eight IP addresses of outbound gateways in a DHCP
global address pool.
Perform the following configuration in DHCP address pool view to configure outbound
gateway addresses for DHCP clients:
Configure one or more outbound
gateway addresses for DHCP clients
To do...
To do...
To do...
2-12
Chapter 2 DHCP Server Configuration
Use the command...
dhcp server option code { ascii
ascii-string | hex hex-string | ip-address
ip-address [ ip-address ] }
undo dhcp server option code
Use the command...
dhcp server option code { ascii
ascii-string | hex hex-string | ip-address
ip-address [ ip-address ] } { interface
vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }
undo dhcp server option code
{ interface vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }
Use the command...
gateway-list ip-address [ ip-address ]