Displaying And Debugging Vrrp - H3C S9500 Series Operation Manual

Operation Manual – VRRP
H3C S9500 Series Routing Switches
Perform the following configuration in VLAN interface view to enable/disable the fast
switch function for a virtual router:
Enable the fast switch function
for a virtual router
Disable the fast switch
function for the virtual router
By default, the fast switch function is disabled for a virtual router.

1.3 Displaying and Debugging VRRP

Display VRRP state
information
Display the configuration
information of the
VRRP-enabled IFM
device
Display VRRP statistics
information
Display VRRP detailed
information
Clear the statistics
information about VRRP
Enable VRRP debugging
Disable VRRP debugging
By default, VRRP debugging is disabled.
To do...
To do...
display vrrp [ interface
vlan-interface interface-number
[ virtual-route-identifier ifm | ifm |
vrid virtual-router-id ] ]
display vrrp ifm
display vrrp statistics [ interface
interface-type interface-number
[ vrid virtual-router-id ] ]
display vrrp verbose [ interface
type number [ vrid
virtual-router-id ] ]
reset vrrp statistics [ interface
interface-type interface-number
[ vrid virtual-router-id ] ]
debugging vrrp { state | packet |
error }
undo debugging vrrp { state |
packet | error }
Use the command...
vrrp vrid virtual-router-id fast-switch
undo vrrp vrid virtual-router-id fast-switch
Use the command...
1-11
Chapter 1 VRRP Configuration
Remarks
Available in any
view
Available in user
view