Electro Industries/GaugeTech Shark 100T Quick Start Manual

Mechanical Installation

Release clip
DIN Installation
Installation Steps: Slide top of groove of meter onto DIN Rail. Press gently until the meter clicks into
place. If mounting with DIN Rail provided, use Black Rubber Stoppers (also provided) shown above.
To remove meter, pull down on Release clip.
Electrical Wiring: Select diagram to meet your application.
N A B C
High
Side
Low
Side
N A B C
A B C
A B C
NOTE: Other wiring configurations are available. See the full Manual on the enclosed CD.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
Shark® 100T Quickstart Guide
DIN Rail with black
rubber stoppers
GND
Power
L (+)
Supply
N (-)
lc lb la
VRef
A
B
C
WYE direct, 3
phase, 4 wire
GND
Power
L (+)
Supply
N (-)
lc lb la
VRef
A
B
C
Delta direct, 3
phase, 3 wire
Ic
N A B C
lc lb la
WYE with PTs, 3
N A B C
phase, 4 wire
A B C
lc lb la
Delta with PTs, 3
A B C
phase, 3 wire
Doc E145704
#
Shark® 100T Quickstart
Ib Ia
100T
Dimensions
GND
Power
L (+)
Supply
N (-)
VRef
A
B
C
GND
Power
L (+)
Supply
N (-)
VRef
A
B
C
QS - 1