English
Message Waiting indicator
Some PBX systems use a function called Message Waiting. The telephone will
indicate when a call was received by flashing the Massage Waiting light next to
the display.
The MW switch is located behind the battery cover on the underside of the
telephone.
The MW function operates differently depending on the PBX in question.
Please contact the system controller for more information.
The following four alternatives are available: LED+, LED-, ringer indicator
( ) and high DC voltage (HV).
When the telephone is used in systems without a telephone exchange ( )
should be selected.
Programmer
A dedicated programmer (optional) can be connected to the PROG socket
located on the underside of the telephone, this allows easy programming of the
10 One-Touch memories.
/
/ PROG switch (located on the underside of the telephone) must be
The
P
N
set to PROG.
Declaration of conformity
Doro hereby declares that this product, Doro Congress 150, conforms with the
essential requirements and other relevant regulations contained in the Directive
1999/5/EC.
A copy of the manufacturer's declaration is available at www.doro.com/dofc
EN 5