Table of Contents
Related Manuals for Doro 313C
Summary of Contents for Doro 313C
- Page 1 Manual doro 313C...
- Page 2 5 Handset Volume Control 15 Scrolling Buttons 6 Store Button 16 New CID message and Visual Ring Indicator 7 Memory button 17 Select Phone Book mode 8 Recall button 18 Warning tone control 9 Redial button 10 Hands Free Button www.doro.com...
-
Page 3: Installation
14. Lift the handset and listen for the dial tone. To change any of the above settings, press and hold for approximately 4 seconds and repeat steps 4. - 12. above. www.doro.com... -
Page 4: Wall Mounting
When the telephone is not in use the date and time, number of new and total number of calls stored in the Caller ID memory will be shown in the display. The display will illuminate during ringing, when accessing memory functions and dialling out. www.doro.com... -
Page 5: Operation
The audible response within the earpiece may be adjusted using ♫ located on the side of the unit. To adjust the speaker volume (hands free), use located on the side of the telephone. Warning! Do NOT select the maximum handset volume unless you already having hearing difficulties. www.doro.com... -
Page 6: Hands Free Function
Warning tone A warning tone can be selected using the switch located on the back of the unit, if the handset is then not replaced correctly an alarm will sound after 20 minutes. www.doro.com... - Page 7 (see the table above). 6. Press Press if you need to insert a pause in the telephone number. If you wish to change a number, store the new number in the same location as the old one. www.doro.com...
- Page 8 Deleting all entries in the Phone Book 1. Press 2. Scroll to the required memory location using 3. Press and hold until the display shows DELETE ALL? 4. Press and hold until the displayed telephone number disappears. www.doro.com...
- Page 9 3. Select a memory location by pressing the relevant keypad digit Press if you need to insert a pause in the telephone number. If you wish to change a stored telephone number, store the new number in the same location as the old one. www.doro.com...
-
Page 10: Caller Identification
It is an International call or a call from a PBX (no OUT OF AREA information received). Information on the number is blocked. The call could PRIVATE also be from a PBX. New number not previously recorded or logged. Several calls have been received from the same caller. www.doro.com... - Page 11 The unit is now set up to insert 0/00 when using the dial back feature from the CID log in accordance with Telecom NZ requirements. If a charge for local calls is unacceptable the dial back feature should not be used, refer to page 15. www.doro.com...
-
Page 12: Troubleshooting
It may not be possible to receive Caller ID information if the phone operates in a PBX system. If the telephone still does not work, contact Doro or the place of purchase. Don’t forget the receipt or copy of the invoice will be required for guarantee purposes. -
Page 13: Declaration Of Conformity
9AM - 5PM Monday-Friday excluding Bank Holidays. Alternatively, E-mail on: tech@doro-uk.com You can contact us in writing: Consumer Support Group, Doro UK Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE, (regarding any Spares or Technical query), or Telephoning (Spares only): 01527 584377 Web site: www.doro-uk.com... -
Page 14: Australia And New Zealand
(As a matter of precaution, we recommend disconnecting the telephone during a thunderstorm). This guarantee does not affect your statutory rights. AUSTRALIA NEW ZEALAND DORO Australia Pty Ltd Atlas Gentech (NZ) Limited PO Box 6760 Private Bag 14927 Baulkham Hills BC NSW 2153... -
Page 15: Technical Information
If a charge for local calls is unacceptable, the “DIAL“ button should NOT be used for local calls. Only the 7 digits of the local number should be dialled from your telephone. DO NOT dial the area code digit or the “0“ prefix. www.doro.com... - Page 16 English Version 1.0...
Need help?
Do you have a question about the 313C and is the answer not in the manual?
Questions and answers