CONGRESS 200 English Business Telephone User guide...
Page 3
1 Hook switch 8 Group listening button and LED 2 Speaker 9 Speaker/Headset button and LED 3 Handset/Headset Volume Control 10 One-Touch Memories 4 Recall Button 11 Ringer/Message Waiting Indicator 5 Redial/Pause Button 12 Speaker Volume Control (on the underside) 6 Store/Mute button and LED 7 Hold button and LED...
3. Enter time (Hours-Minutes-Seconds) using the telephone keypad (0-9). 4. Replace the handset. The time (clock) will be displayed after 5-10 seconds. Hearing Aid Compatible This telephone is hearing aid compatible. Select the T mode on your hearing aid to enable this feature. www.doro.com...
Any damage occurring due to incompatible or non Doro headsets being installed, will not be covered under the telephones guarantee. Making a call with the headset 1.
1. While on a call. 2. Press to place the telephone call on hold. If the handset is in use it may now be replaced onto the hook switch. 3. To resume the telephone call, lift any handset connected to the same line. www.doro.com...
PBX. Access to additional network services can be gained by using the recall button keys. Please refer to page 9 for information on this feature or contact your network operator for more information. www.doro.com...
Page 8
8.......... Melody C ....... Normal 9.......... Melody C ....... High 0.......... Off * ....... - * If is selected, the ringer will be turned off until the next time the handset is lifted. The ringer will then revert to the previous setting. www.doro.com...
Many PBX systems use a function called Message Waiting. The telephone can show if a call was received in you absence by flashing the Message Waiting Indicator in standby mode. This function operates differently depending on the PBX in question. Please contact the system controller for more information. www.doro.com...
1. The system setting switch must be in the position ON, see page 9. 2. Lift the handset (ignore any network announcements) and press 3. Press 4. Select preferred setting ( =2.0 and =3.6 s). 5. Press and replace the handset. www.doro.com...
Page 11
1. The system setting switch must be in the position ON, see page 9. 2. Lift the handset (ignore any network announcements) and press 3. Press 4. Select preferred hour display ( =12 hrs and =24 hrs). 5. Press and replace the handset. www.doro.com...
9AM - 5PM Monday-Friday excluding Bank Holidays. Alternatively, E-mail on: tech@doro-uk.com You can contact us in writing: Consumer Support Group, Doro UK Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE, (regarding any Spares or Technical query), or Telephoning (Spares only): 01527 584377 Web site: www.doro-uk.com...
(As a matter of precaution, we recommend disconnecting the telephone during a thunderstorm). This guarantee does not affect your statutory rights. AUSTRALIA NEW ZEALAND DORO Australia Pty Ltd Atlas Gentech (NZ) Limited PO Box 6760 Private Bag 14927 Baulkham Hills BC NSW 2153...
Page 14
Telecom’s network services. This equipment shall not be set to make automatic calls to the Telecom “111” Emergency Service. This equipment may not provide for the effective hand-over of a call to another device connected to the same line. www.doro.com...