Switching The Answer Machine On/Off; Outgoing Message - Doro Arc 7 Manual

Answer Machine (only Arc 9r)
When the answer machine is switched on calls are answered after a set number of rings, your outgoing
message is heard and the caller can leave a message. The total memory capacity is up to 30 mins. Most
functions can be accessed from both base unit and handset.

Switching the answer machine on/off

Press (on the base unit) to switch the answer machine on/off. If the base unit's display is flashing/showing -- the
1
answer machine is disconnected or time/date is not set..
On/Off from the handset
1. Press Menu. Scroll to Answer Machine. Press Select.
2. Scroll to TAM On/Off. Press Ok.
3. Scroll to desired setting. Press Ok.
If the handset's display shows
Even when answer machine is OFF it will still answer after 10 rings, please see

Outgoing message

The outgoing message (max 3 min) is heard by incoming callers. There are two separate outgoing messages, one for
Answer Only (callers cannot leave a message) and one for normal answer function.
1. Press Menu. Scroll to Answer Machine. Press Select.
2. Scroll to TAM Settings. Press Select.
3. Scroll to OGM Settings. Press Select.
4. Scroll to Answer & Record/Answer Only. Press Select.
5. Scroll to Record. Press Select.
6. After the long beep you can record your message (speaking approx. 20 cm from the keypad). Press Ok.
7. The message will be played back to you. Repeat the above to change.
Also select desired answer function. See
A pre-recorded message is used until you make your own recording, and that message can also be restored if required.
Default
restore this, select
Screening
Incoming messages will be heard on the loudspeaker of the base unit as they are received. If nothing can be heard,
check that the volume is turned up and that the function has been activated – see separate description. You can also
press Ok on the handset while a message is being recorded.
The call can be intercepted by pressing
Using the answer machine (base unit)
The numbers on the base unit will flash when there are new messages.
Press (base unit) to start playback.
9
Command Function
/ .........Prev msg/Skip forward.
8 8 9 9
■ ......................Stop playback.
X ......................Delete current message.
VOL + / - . .........To increase/decrease the volume.
Delete all old messages
After playback: Hold down X until you hear a beep.
with a steady light the answer machine is switched on.
Answer Machine Settings
instead of Record in sequence above.
or by lifting the receiver of another telephone.
English
Remote activation
.

.
required. . To