Recycling And Disposal - Qualcast M0E-7ET-410 Assembly Manual

Technical Data
Appliance
Motor Voltage ............................................................................................................................18V DC
Capacity.........................................................................................................................................1.7Ah
No-load speed..........................................................................................................................1400/min
Cutting length.............................................................................................................................410mm
Cutting capacity............................................................................................................................14mm
Net Weight.................................................................................................................................3.67kgs
Measured sound pressure level .......................................................................88.2dB (A), k=3 dB (A)
Measured sound power level....................................................................98.3dB (A), k=3dB (A)
Guaranteed sound power level ..................................................................................101dB (A)
Vibration..........................................................................Front handle :1.783m/s
.......................................................................................Rear handle :1.885 m/s
The declared vibration value has been measured in accordance with a standard test method and
may be used for comparing one tool with another. The declared vibration value may also be used in
a preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the tool can differ from the declared
value depending on the ways in which the tool is used. Identify safety measures to protect the
operator that are based on an estimation of exposure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times when the tool is switched off and when it is
running idle in addition to the trigger time).
The sound intensity level for the operator may exceed 85dB(A) and ear protection measures are
necessary.
Battery Pack
Nominal voltage.........................................................................................................................18V DC
Capacity.........................................................................................................................................1.7Ah
Charging time................................................................................................................approx. 3-5 hrs
Charger
Rated voltage..........................................................................................................230 - 240V ~ /50Hz
Nominal Consumption.....................................................................................................................12W
Output voltage of Charger..........................................................................................................18V DC
Output current of Charger...........................................................................................................400mA
Protection class ........................................................................................................................Class II
Protection category........................................................................................................................IP 20
Customer Helpline 0845 034 2279
14
www.gardenservicecentre.co.uk

Recycling and Disposal

Disposal Instructions
1. Recycle unwanted materials instead of disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to the local recycling centre and disposed of in an
environmentally safe way.
2. Recycle rather than dispose of unwanted material in landfill whenever possible. The machine
must be delivered in rigid packaging to avoid damage during transportation. The packaging and the
machine itself are manufactured from recyclable materials and should be disposed of accordingly.
3. Do not throw your clippings into a rubbish bin where it will be disposed of in landfill .You can
dispose of clippings on your compost heap, alternating then with other garden material. The more
thoroughly you chop the clippings beforehand, the more rapidly they will degrade. Alternatively,
many communities provide a public collection point where you can dispose of your garden waste in
an environmentally friendly manner.
4. Only dispose of electrical/electronic/battery iterms in separate collection schemes, which cater
for the recovery and recycling of materials contained within. Your cooperation is vital to ensure the
2 ,k=1.5m/s 2
success of these schemes and for the protection of the environment.
2 ,k=1.5m/s 2
5. Recycle packaging where facilities exist.
6. This symbol is known as the Crossedout Wheelie Bin Symbol. When this symbol is marked on
a product or battery, it means that it should not be disposed of with your general household waste.
Some chemicals contained within electrical/electronic products or batteries can be harmful to
health.
Customer Helpline 0845 034 2279
www.gardenservicecentre.co.uk
15