Guarantee; Declaration Of Conformity - Qualcast M0E-7ET-410 Assembly Manual

Guarantee

Dear Customer,
In the unlikely event that your device develops a fault, please contact our Customer service
department on the telephone number shown below.
1. These guarantee terms cover additional guarantee rights and do not affect your statutory
warranty rights.
Claims must be accompanied by Proof of Purchase. This must be in the form of a Sales receipt
or Bank statement and must show that the product has been purchased within 2 years prior to
the claim, from the retailer that it was originally sold to.
2. Our guarantee covers problems caused by material or manufacturing defects, and will result
in the repair of these defects or replacement of the device with a like for like or similar article.
Please note that our devices have not been designed for use in commercial, trade or industrial
applications. Consequently, the guarantee is invalidated if the equipment is used in commercial,
trade or industrial applications or for other equivalent activities.
3. The following are also excluded from our guarantee:
A) Faults due to accidents, customer misuse, or unauthorized repairs
B) Consumable Parts such as Blades
C) Failure due to lack of routine maintenance
D) Failure as a result of not using the equipment in accordance with the manual and safety
instructions
E) The adjustment of cables, drive belts, or recoil starters
4. The guarantee is valid for a period of 2 years starting from the purchase date of the device.
Guarantee claims should be submitted before the end of the guarantee period within two weeks
of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee
period. The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts fitted will not result in
an extension of the guarantee period, and no new guarantee will become active for the work
performed or parts fitted. This also applies when an on-site Service is used.
5. Please keep your sales receipt in a safe place. If the defect is covered by our guarantee your
device will either be repaired under the terms of guarantee or we will send you a replacement
device. This device may be re-conditioned or Like for like replacement.
Customer Helpline 0845 034 2279
16
www.gardenservicecentre.co.uk

Declaration of Conformity

EC Declaration of Conformity
0197
Homebase Ltd
We hereby certify that the product stipulated above complies with all the relevant provisions of the following EC new approach directive/s.
This declaration of conformity is issued under the sole responsibility of the manufacturer
Type of Product: Cordless pole hedge trimmer
Product Description: Photograph:
18V DC ,1.7Ah Ni-Cd Battery pack
No-load speed:1400min -1
Cutting length :410mm
Cutting width :14mm
Applicable EC Directives
2006/42/EC (MD) 2004/108/EC (EMC)
2006/95/EC (LVD) 2009/105/EC (Pressure)
89/686/EEC (PPE) 2009/48/EC (Toys)
2009/142/EC (Gas) 89/106/EEC (Construction)
Applicable
Harmonized Standards: Report Date
EN 60745-1:2009+A11 2012-09-26
EN ISO 10517:2009
EN55014-1:2006/+A1:2009
2012-04-01
EN55014-
2:1997/+A1:2001/+A2:2008
Issued number: 1.0 Issued on : 2012-09-28
Creator: Max Shi
Position: QA
The associated technical file for this product can be found within Homebase Ltd idocument system
Customer Helpline 0845 034 2279
www.gardenservicecentre.co.uk
12
Year of 1st Issue .
489-499 Avebury Boulevard
Saxon Gate West
Milton Keynes
Buckinghamshire
MK9 2NW
Model Number: M0E-7ET-410
Cat / Article Number: 131606
1999/5/EC (R&TTE)
2000/14/EC Annex , 2005/88/EC
L =88.2dB(A), L = 98.3dB(A), K=3dB(A)
WA PA
2004/26 /EC
Verification of conformity
Certificate Notified Body
MD TÜV Rheinland
EMC ITS
Signed :
Name : Roger Panton-Kent
Position: Head of Quality Assurance
H
17