Attaching The Duct Connectors To The Exhaust Hose - EdgeStar AP14009COM-1 Owner's Manual

4. Lower the window to secure the window kit in place. You may need to use duct tape to better
secure the window kit. If you are not using the continuous drain option be sure the cap is
fastened to the opening between the two grated adapters to ensure heat does not enter
through the hole.
Caution: Secure your window with window locks. Please contact your EdgeStar retailer to
purchase window locks.

Attaching the Duct Connectors to the Exhaust Hose

5. Attach the connectors to the hose:
a. Extend the ends of the exhaust hose.
b. Thread the duct connector onto the exhaust hose by turning it clockwise until it stops.
8