12.4.6 Shock absorber pin
There is a bushing on either end of the shock absorber. It has a wider profile on one end to avoid it becoming
dislodged when the pin is inserted (see the two figures below).
Narrow edge
Wide edge
When positioning the shock absorber inside the fastening (situated at the bottom of the cabinet or in the tub), take
care when positioning the bushing, so as to insert the pin from the part of the bushing with the widest profile.
If you are having difficulty inserting the pin, grease it a little.
Technical Support - DMM
74/80
599 74 98-60 Rev.00