Water Level Sensor; Detergent Container - Electrolux WE170V Service Manual

12.2.5 Water level sensor

Remove the worktop.
Remove the connector.
Pull out the small tube which connects it to the pressure chamber.
Tighten the two tabs which secure it to the cabinet and remove it.

12.2.6 Detergent container

Remove the worktop.
Remove the control panel.
Pull out the pipes that connect it to the solenoid valves (cold water and hot
water).
Unfasten the two screws securing it to the central crosspiece.
Unfasten the screw in the clamp that fixes the detergent loading pipe to the
tray, and remove it from its housing.
Remove the detergent container.
Technical Support - DMM 63/80 599 74 98-60 Rev.00