Display Board/Light Diffuser/Button Springs/Buttons Assembly - Electrolux WE170V Service Manual

Remove the control panel and position it as shown in the figure, making sure
you introduce a protection to prevent scratching it.

12.2.4 Display board/light diffuser/button springs/buttons assembly

Remove the worktop.
Remove the control panel.
Remove the screws and release the hooks which secure the board assembly
to the control panel.
The dial and the dial cover remain fixed to the control panel.

Buttons spring
Disconnect it from the control panel and remove it from the two side pins.

Light diffuser
Unhook the three hooks that fasten it to the control panel.

Buttons
The buttons have a number printed on them. See the figure for numbers.

Selector light diffuser
To remove, unhook the hooks that fasten it to the control panel.
Technical Support - DMM 61/80 599 74 98-60 Rev.00