Faults/Warnings Signals; Selection Error; Warnings - Electrolux WE170V Service Manual

4.8 Faults/warnings signals

4.8.1

Selection error

The selection errors are noticed to customer by a flashing "Err" text on cycle time digits; buzzer doesn't
sound a specific melody and Start/Pause LED doesn't flash.
The signalling is displayed for about 1 second in following cases:
-
if coin meter is present and the user try to start a cycle without payment;
-
when an incompatible option button with selected washing program has been pressed;
-
when an option button is pressed or the selector is moved during the cycle execution.
4.8.2

Warnings

When a machine fault is detected, a warning is displayed on cycle time digits with "Exx" format.
The faults that are noticed to customer are:
-
E10 : tap closed, due to water loading timeout
-
E20 : clogged filter, due to water draining timeout
-
E40 : door not properly closed, due to device locking timeout
-
E90 : no communication between main boards and coin operated machine or detergent dispenser
-
EF0 : detergent overdosing
-
EH0: mains supply problems, due to voltage/frequency out of standard working range
Warning code/message is displayed as long as the fault condition is present. The buzzer sounds for about 5
minutes, but not in case of EH0.
For the first three codes, once the problem has been solved, pressing Start/Pause button the warning is not
shown anymore and buzzer stops sequence.
16