Delay Start Button; Start/Pause Button - Electrolux WE170V Service Manual

When pressing the button the option is enabled or disabled. When the option is enabled the associated
ICON switches on and cycle duration is updated in display digits.
3.4.4

Delay start button

The delay buttons is associated with one dedicated icon on the LCD. When the delay is active the icon is
switched on, both during program setup and delay phase in progress.
Each time the button is pressed, the delay time increase in the following way:

Up to 90 minutes in steps of 30 minutes

From 2 to 70 hours in steps of 1 hours
After "70h", pressing again the button, the function is deactivated. Once the delay has been set and after 3
seconds of no key presses the digits will display again the program duration. To see the delay time again,
press once the button. After the machine is started the display will show the delay time counting down.
After cycle start, selected delay time can only be cancelled (machine must be put in pause first).
3.4.5

Start/pause button

The Start/Pause is used to start the cycle once the program and options have been set. Pressing the button
during the cycle will pause the machine to allow changing options or possibly open the door porthole (if
necessary conditions of temperature and water level are met). Press again to restart cycle.
The associated LED blinks slowly during programme setup, during the pause; it is lighted on steadily when
the cycle is in execution; it is lighted off when the cycle is ended with the door unlocked.
10