ADC AD-120ES Installation Manual page 5

IMPORTANT: The dryer must be installed in a location/
environment, which the ambient temperature remains
between 40° F (4.44° C) and 130° F (54.44° C).
The operation of this appliance may affect the operation of
other types of gas appliances, which take their air for safe
combustion from the same room. If in doubt, consult the
appliance manufacturer(s).
Use this dryer only for its intended purpose, drying fabrics.
The "Cool Down" Cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be
removed from the tumble dryer or piled or stacked while hot.
Fabric softeners or similar products should not be used in a
tumble dryer to eliminate the effects of the static electricity,
unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
WARNING
!
To reduce the risk of personal injury, install lockable
doors to prevent public access to the rear of the
dryers.
Do not use or store flammable materials in the
appliance storage drawer or near this appliance.
Do not spray aerosols in the vicinity of this appliance
while it is in operation.
Do not modify this appliance.
Exhaust duct outlet should be checked periodically for
blockages, and if any found, removed.
IMPORTANT: A means of restraint must be used to prevent
straining of the gas supply when the appliance is moved.
An external means of power removal (disconnect device)
must be provided by the installer.
CE ONLY
IMPORTANT: This appliance must only be installed and
operated in the country of destination indicated on the dryer's
data plate. If the appliance is to be installed and operated in
a country other than the one indicated on the data plate, a
data plate amendment must be obtained from American Dryer
Corporation.
IEC335 applies.
WARNING
!
This appliance must only operate with the gas type
indicated on the dryer's data plate. If the appliance
is converted (gas type is changed), a data plate
amendment must be obtained from American Dryer
Corporation.
This appliance may cause spillage of products of
combustion from an open-flue appliance fitted in the
same room, and that such an appliance shall be tested
for clearance of products with the appliance in
operation and all windows and doors closed.
Disconnect power before resetting the hi-limit. The
hi-limit is located on the left side of the burner box,
looking at the burner from the back of the dryer. Press
and release and the hi-limit will reset.
113386 - 28
NOTES _____________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
www.adclaundry.com 5