FAAC B680H Manual page 4

9. REVERSING THE OPENING DIRECTION
downward travel side.
side.
Reverse the motor cable connection as shown in point
of Fig. 14
10. ACCESSORIES
10.1 Installing a photocell
1. Remove the barrier compartment.
2. Match the holes on the barrier compartment with the holes on
installation side; ref.
3.
4.
10.2 Installing the bar light kit
Ensure that the two connector jacks are actually in
contact with the conductors inside the cord. Should
the bar lights still not turn on, reverse the connection
polarity.
10.3 Installation of a receiver antenna
11. REPAIRS
5