FAAC B680H Manual page 10

This operation changes the value of the parameters
SC
and
values as shown in the tables in paragraph 6.3.
Unlike the other parameters, the value of step
not stored, thus allowing access to the menu through a
neutral condition, which is the one displayed every time the
configuration menu is opened..
St 00
parameter on
cause irreversible damage to the automated system, in
particular if the default corresponds to a beam length
shorter than the actual one.
5.3 BUS accessories menu
bu
will flash)
no
BUS devices.
FSW-CL FSW-OPEN
FSW CL:
OPEN:
So
FO FC oc
, ,
dF
is
no
no
Y
will appear as confirmation.
11
more than one pair of photocells have the
4.1.2
cc
if there is a
Er
as shown
DL1 DL2
J6
1 2