Table of Contents
Advertisement
MOTION SETUP
MOTION SETUP
# 1 – Recording Frame Rate Per Camera – You can adjust the frame rate for the cameras that are active on
the system. Clicking on "Default" will allocate the system resources automatically between the active
cameras. (This feature is not available on the 18XX Series DVR's.)
# 2 – Camera – Select the camera that you would like to modify settings for.
# 3 – Sensitivity – The motion detection sensitivity can be adjusted individually for each camera by moving the
adjuster as needed.
# 4 – Alarm & Secure Channel – Place a check in the Alarm box, if you would like the system to provide an
audible alarm when motion is detected. You can also modify the time when the alarm tone will be active.
Place a check in Secure Channel to hide channel from being viewed remotely.
11
Advertisement
Table of Contents
