Backup To Floppy - Vision PRO User Manual

Before making an image backup to a floppy disk you must have the image displayed by itself on the
screen before entering the backup section. If you don't do this you will not be able to select the
backup to floppy option.
Once the image that you want to save is displayed you can choose to save a single image to a floppy
disk if you wish.
If you select the floppy backup option, and click on save the system will display the
# 1 –
below message if you have chosen to use the Watermark feature, otherwise the
image will be saved without the watermark program.
If you click "Yes" the watermark utility along with the image will be saved to the floppy .
•
You can transfer as many single images as you have room for to the floppy disk, however, you only
need to copy the watermark check program once.
!
The image will be copied onto a floppy diskette in BMP or JPG format, depending on your
selection under setup. The image will be copied with the 'watermark checker program' which will
allow you to ensure that the image remains unchanged during future review.

BACKUP TO FLOPPY

BACKUP TO FLOPPY
35