Power Setup - Vision DVR-800-2015 Quick Setup Manual

POWER SETUP

The POWER SETUP configuration defines how the DVR will run.
As has been described previously use the arrow and ENTER buttons on the r/c to highlight and
change the settings (unless otherwise described).
DELAY POWER OFF should be
ON to activate the DELAY TIME.
ACC RECORD should always be
set to NORMAL.
POWER ON TIME and POWER
OFF TIME are used with TIME
Mode to turn the DVR ON and
OFF at PRE-SET times.
SECURITY
The SECURITY configures access to the Menus.
As has been described previously use the arrow and ENTER buttons on the r/c to highlight and
change the settings (unless otherwise described)
For most applications the DVR should be set
up to ACC.
This means that whenever there is a voltage
on the accessory live wire (Yellow wire on
the Power Plug) the DVR will start running.
The TIME option is used to automatically
start and stop the DVR between pre-set
times.
DELAY TIME sets how long after ignition off (accessory
live "see's" no voltage) the DVR keeps recording for.
To change the time and date use the numeric buttons
on the r/c to set the new time. To delete a number press
the DEL button on the r/c.
Highlight the SAVE option and press the
ENTER button on the r/c to save the changes.
We recommend that the PASSWORD is turned
OFF but to ensure that that the DVR settings
cannot be tampered with Passwords can be
added.
To set a password turn PASSWORD ON and
enter and confirm the passwords using the
numeric keys on the r/c (password is numeric).
Highlight the SAVE option and press the ENTER
button on the r/c to save the changes.