Add Backup Schedule - Vision PRO User Manual

ADD BACKUP SCHEDULE

# 1 – Title - Enter the title of the backup session you wish to create.
# 2 – Date/Time - Select the start and end time for when the backup should occur. .
# 3 – Rotate Option - Enter the rotation criteria for the backup you are creating. If the rotation is set to none,
the backup session you are creating will only occur once on the selected time.
# 4 – Backup Start Time Interval After - Select the start time for the backup to begin after the end time that you
have selected is met.
# 5 – Media – This section allows you to select the media that you would like the backup to use. The media list
can contain up to 8 different media locations, any drive that is available to the system can be used for the
backup. Click on Add Media to define were the backup should occur. We do not recommend the use of any of
the systems main drives for the backup. In addition the system can establish a connection to a remote backup
location by IP address. The remote IP system will need to have the Center software installed on this machine
for it to work. The system will make it's connection to the K-Remote backup Server software that needs to be
running on the remote machine. Refer to the center software manual for more information. You can move a
media type up or down in the list. If the backup process fails on the first media the system will move down the
list and try the next media selection.
# 6 – Overwrite Mode – Check the overwrite box if you would like the newest data to overwrite previous backup
data if there is not enough free space available.
23
# 7 – Priority – Select the priority that this backup should have in relation to others.
# 8 – Add – Click here to add this backup to the list.