Programming A Tax Table - Samsung ER-650 Operation And Program Manual

Programming a Tax Table

In some cases, a tax that is entered as a percentage does not exactly follow the tax
charts that apply in your area (even if the tax chart is based on a percentage). In these
cases, we recommend that you enter your tax using tax table programming. This
method will match tax collection exactly to the break points of your tax table.
Before programming, obtain a copy of the tax table you wish to program. You will
need the printed tax table if you wish to determine the break point entries yourself.
The "Tax Table Programming Example - Illinois 6% Tax Table" on page 133 is used
as an example in the steps that follow.
Note: You can enter up to 75 break points.
130 • Program Mode Programming
1. Turn the control lock to the PGM position.
2. From the PROGRAM MODE menu, press 2 to view the TAX PROG.
screen:
TAX NUMBER (1-4)
TAX TYPE (0-2)
0 : ADD-ON
1 : TAX TABLE
2 : VAT
3. When the arrow is pointed at the TAX NUMBER field, enter the number
of the tax you wish to program. (There are four taxes available, enter 1, 2,
3, or 4.) The arrow will move to the TAX TYPE field.
4. Enter 1 for an TAX TABLE programming. The appropriate TAX #
PROGRAMMING screen displays:
TAX #1 PROGRAMMING
FIRST TAX AMOUNT
NON-TAXable AMOUNT
# OF NON-REPEAT
BREAK
# OF REPEAT BRK
TAX PROG.
0.01
0.10
1
1
5
3
Samsung ER-650