Clerk Time Keeping - Samsung ER-650 Operation And Program Manual

Clerk Time Keeping

Clerk time keeping is a standard feature of the ER-650. Clerks can clock in and clock
out at any time, regardless of whether they are signed on to operate the register.
(Clocking in and clocking out are separate functions from signing on or signing off to
operate the register.) You must assign secret clerk codes to clock in or clock out.
See "System Options" in the "Program Mode Programming" chapter to set up your
clerk system and see "Clerk Programming" to assign a secret code.
In addition:
Note: When a function is located on a function look up menu key, you access the
function by pressing the appropriate function look up key, then pressing the
numeric digit corresponding to the function you wish to select. On the default
keyboard, the
TIME IN/OUT function is function #8 on the function look up 1 menu, so to use
the
TIME IN/OUT function, you would first press FUNCTION LOOK#1, then press
the numeric 8 key.
To Clock In/Out:
Samsung ER-650
• If a clerk forgets to sign in or sign out, or if sign in or out records need
to be modified, these corrections can be made by the appropriate
authority in the program mode. See "Clerk In/Out" in the in the
"Program Mode Programming" chapter .
• Clerk times can be read in the X control lock position or reset in the Z
control lock position. See the "X-Mode" and/or "Z-Mode chapters.
1. Turn the control lock to the REG position.
2. Any current transaction must be finalized before clocking in or out.
3. Press the TIME IN/OUT key (or, select the TIME IN/OUT function from
one of the function look up keys.)
TIME CLOCK IN/OUT
ENTER SECRET CODE
AND PRESS CASH
Operating Instructions • 21