System Options - Reference Information - Samsung ER-650 Operation And Program Manual

System Options - Reference Information

Option
BEEPER ACTIVE
REAL CLERK KEY
CLERK ENTRY
0:PUSH 1:CODE
CLERK ASSIGNED WHEN
CLERK KEY IS PUSHED
(1-10)
CLERK IS Y:POP-UP
N:STAY-DOWN
DRAWER NEEDS TO BE
SHUT TO OPERATE
ACTIVATE OPEN
DRAWER ALARM
SECONDS TO ALLOW
DRAWER OPEN
ALLOW POST TENDER
OPEN DRAWER ON POST
TENDER
ALLOW MULPTIPLE
RECEIPT
CASH DECLARATION
REQ BEFORE REPORTS
MGR CONTROL TO TEND.
NEGATIVE BALANCE
ZERO BALANCE
RESET TRANSACTION #
ON Z REPORT
RESET GRAND TOTAL
AFTER Z REPORT
OPEN DRAWER WHEN
REPORTS ARE RUN
140 • Program Mode Programming
Entry Description
Y or N
Select N for a silent keyboard.
Y or N
Select Y if the optional bayonet clerk lock and key system is
installed.
0 or 1 Select PUSH for a push button clerk, select CODE for a
code entry clerk system (number - clerk or clerk - number -
clerk) sequence.
1-10
If PUSH system is selected, you can select the clerk that is
signed on when the CLERK # key is pressed. Note that the
maximum clerk number you can enter here is determined by
how many clerks are allocated in memory.
Y or N Select Y for pop-up clerks, select N for stay down clerks.
With pop-up clerks, you must sign on for each transaction.
With stay down clerks, the same clerk remains signed on
until sign off.
Y or N Select Y to enforce closed drawer for register operations.
Y or N
Select Y if you want the error tone to automatically sound
when the drawer stays open longer than the time set in the
following field.
1-99 If you enable the open drawer alarm above, you can set the
length of time (1-99 seconds) before the alarm sounds.
Y or N Select Y to allow re-tendering should a second change
calculation be necessary. Re-enter the tendered amount and
press the CASH key to show the new change computation.
Y or N If you enable post tendering, select N to not open the cash
drawer after the second tender.
Y or N
Set to Y if you wish to issue more than one copy of a
transaction receipt.
Y or N Select Y to enforce a cash declaration function before a
financial, clerk, or cash in drawer report can be generated.
Y or N Select Y if you wish to control negative transactions (when
cash is removed from the drawer). When selected the
control lock must be in the X position to finalize the
transaction.
Y or N Select Y if you wish to reset the transaction number (often
called the receipt counter) to zero after the financial report
is reset.
Y or N
Select Y if you wish to reset the grand total to zero after the
financial report is reset.
Y or N
Select N to stop the drawer from opening when reports are
run.
Samsung ER-650