Decimal Point & Tax Information; Tax Rate - Samsung ER-350 Operator's And Programming Manual

3-2. DECIMAL POINT & TAX INFORMATION
This programming is for setting up the decimal point and tax information.
Decimal point information comes in four varieties - from 0 to 3
and tax information comes in three varieties - VAT, ADD ON TAX,
EXTERNAL STRAIGHT TAX.
If you want to set up this information, do it as below.
n1 n2
│ └────────────────── Tax information
Decimal point information - 0 -> 2 Decimal point
Example. 2 Decimal point and VAT version
0

3-3. TAX RATE

As previously stated this model has three separate tax rates.
These rates are set up and calculated between 0.001% and 99.999%.
Each tax has a number which is classified by item.
n2 n3
└──────────────┘
tax rate(0.000%- 99.999%)
NOTE !! Refer to 3-2. DECIMAL POINT & TAX INFORMATION about tax version .
Example. Tax rate of VAT 1 is 8.000% or tax rate of ADD ON TAX 1 is 8.000%.
8
·
RF
1 -> 0 Decimal point
2 -> 1 Decimal point
3 -> 3 Decimal point
0 RF
n1
·
n4 n5 n6
1
0 0 0
0 -> VAT (Value Added Tax)
1 -> ADD ON TAX
2 -> EXTERNAL STRAIGHT TAX
DECIMAL,TAX
RA ── Select Tax No.
┌ VAT version -> between 1 and 4
TAX │ ADD ON TAX version -> between 1 and 2
└ EXTERNAL STRAIGHT TAX -> only 1
RA ── Select Tax 1
TAX ── Rate
16
TAX1 RATE
00
8.000