Attentions In Operation - Haier ES50V-F1(R) Service Manual

Service Manual
Model No:ES50/80/100V-F1(R)
2. The water heater will automatically complete heating as per the selected number of people.
50L allows one-person bath and two-person bath;
80L/100L allows one-person bath two-person bathand three-person bath ;
Single/dual
Press"1.5kW" to light the icon "Half" , and after the default maximum heating temperature of 75
blinks for 2s, the actual water temperature appears; the water in left inner containers is heated at the
power of 1500W;
Press"3kW" to light the icon "All" , and the water in both inner containers is heated simultaneously at
the power of 3000W;
Bacteria prevention function
1.Press " BPS" to light the icon " " , and after the default maximum heating temperature of 80
for 2s, the actual water temperature appears. After the actual water temperature reaches 80 , the
bacteria prevention is completed, and the function is automatically deactivated, with the " " off. The
maximum heating temperature is the heating temperature before the bacteria prevention function is
activated. Press " B PS" to re-activate the bacteria prevention function.
Note: 1.The bacteria prevention function is available under the Smart or single/dual container modes;
2. Settings of BPS mode can be reserved against power failure;
3. The bacteria prevention function cannot be independent of other functions.
Shutdown
After bath, press to shut it down.
Tips: In the dual container mode, because of different powers for heating tubes of two containers or
other impacts, it is normal that the right container is still heated when the display temperature is 75 .

4-2. Attentions in Operation

Things to note during use
1
Do not connect the power before filling the inner chamber with water in order
to prevent damage to the water heater.
2
Adjust the water temperature to the suitable level before use in order to prevent
scalding.
Insofar as there is adequate hot water, set a lower temperature to reduce heat
3
loss, high temperature corrosion and scaling. This will extend the water heater's
lifespan.
4
otherwise it may cause fire.
5
To avoid danger caused by accidental resetting of the heating breaker, the
power for the heat cannot be supplied by timer and other external switch
devices or connected to circuit with frequent switching for facility use.
container
-7-
blinks